HP M9050 MFP manual Load paper and print media, Load tray

Load paper and print media

This section contains information about loading standard- and custom-size media into the four input trays.

CAUTION: To avoid a jam, never add or remove paper from tray 1 or open tray 2, tray 3, or tray 4 while printing or copying from that tray. To avoid damaging the MFP, print labels, envelopes, and transparencies from tray 1 only. Send labels, envelopes, and transparencies to the upper bin. Print on only one side of labels, envelopes, and transparencies.

Load tray 1

Tray 1 holds up to 100 sheets of paper or 10 envelopes. For more information about supported media, see Supported paper and print media sizes on page 81.

1.Open tray 1.

Figure 6-1Load tray 1 (1 of 3)

2.Load paper according to size and finishing options. Figure 6-2Load tray 1 (2 of 3)

CAUTION: To avoid jams, print sheets of labels one sheet at a time.

3.Adjust the paper guides so they lightly touch the paper stack, but do not bend the paper. Figure 6-3Load tray 1 (3 of 3)

4.Make sure the paper fits under the tabs on the guides and not above the load level indicators.

ENWW Load paper and print media 85