Update the firmware
Update the printer firmware by loading the new firmware file from the computer. You can find new firmware files for your printer at www.hp.com/go/ljm9040mfp_firmware or www.hp.com/go/ ljm9050mfp_firmware.
1.Open the HP Printer Utility.
2.In the Configuration Settings list, select Firmware Update.
3.Click Choose, navigate to the firmware file that you want to upload, and then click OK.
4.Click Upload to load the firmware file.
Activate the
Turn on the
1.Open the HP Printer Utility.
2.In the Configuration Settings list, select Duplex mode.
3.Select Enable Duplex Mode to activate the
Lock or unlock printer storage devices
Manage access to printer storage devices from the computer.
1.Open the HP Printer Utility.
2.In the Configuration Settings list, select Lock Resources.
3.On the Control Panel Access Level
4.Select the devices that you want to lock, and clear any devices that you want to unlock.
5.Click Apply Now.
Save or print stored jobs
Turn on the printer
1.Open the HP Printer Utility.
2.In the Configuration Settings list, select Stored Jobs.
3.Perform any of the following tasks:
●To turn on the
●To print a stored job, select a stored job in the list, type the necessary personal identification number (PIN) in the Enter Secure Job PIN box, type the number of copies that you want in the Copies To Print box, and then click Print.
●To delete a stored job, select a stored job in the list, and then click Delete.
162 Chapter 11 Manage and maintain | ENWW |