![](/images/backgrounds/292384/hp-laserjet-m9050-mfp-users-manual-545221148x1.png)
Configure the device to send e-mail
Before you can send a document to
NOTE: The instructions that follow are for configuring the device at the control panel. You can also perform these procedures by using the embedded Web server. For more information, see Embedded Web server on page 152.
Supported protocols
The HP LaserJet M9040 and HP LaserJet M9050 MFP models support Simple Mail Transfer Protocol (SMTP) and Lightweight Directory Access Protocol (LDAP).
SMTP
●SMTP is a set of rules that define the interaction between programs that send and receive
●If you are using a LAN connection, contact your system administrator to obtain the IP address or host name for your SMTP server. If you are connecting through a DSL or cable connection, contact the internet service provider to obtain the SMTP server IP address.
LDAP
●LDAP is used to gain access to a database of information. When the device uses LDAP, it searches a global list of
●The device supports LDAP, but a connection to an LDAP server is not required in order for the device to be able to send to
NOTE: If you need to change the LDAP settings, you must change them by using the embedded Web server. For more information, see Embedded Web server on page 152, or see the Embedded Web Server User Guide on the device CD.
Configure
Find the IP address for the SMTP server by touching the Network Address button on the
Configure the SMTP gateway address
1.From the Home screen, touch Administration.
2.Touch Initial Setup.
3.Touch
4.Type the SMTP gateway address, either as an IP address or as a fully qualified domain name. If you do not know the IP address or domain name, contact the network administrator.
5.Touch OK.
134 Chapter 9 Scan and send to | ENWW |