7.Press the DIMM straight into the slot (press firmly). Make sure the locks on each side of the DIMM snap inward into place. (To remove a DIMM, the locks must be released.)

Figure 11-28Install DDR memory DIMMs (6 of 8)

8.Slide the formatter board back into the MFP and tighten the two screws. Figure 11-29Install DDR memory DIMMs (7 of 8)

9.Plug in the power cord and connect all cables. Turn the MFP on. Figure 11-30Install DDR memory DIMMs (8 of 8)

10.Reconnect the optional output device to the MFP.

184 Chapter 11 Manage and maintain

ENWW

Page 198
Image 198
HP M9050 MFP manual Enww