3.Adjust the guides to touch the envelope stack without bending the envelopes. Make sure that the envelopes fit under the tabs on the guides.

Figure 7-16Load envelopes in tray 1 (3 of 3)

4.Change the fuser levers (see Change the fuser levers on page 111).

Change the fuser levers

1.Move the output device away from the MFP to gain access to the left door. Figure 7-17Change the fuser levers (1 of 4)

2.Open the left door.

Figure 7-18Change the fuser levers (2 of 4)

WARNING! Avoid touching the adjacent fusing area. It can be hot.

ENWW

Print on envelopes 111