HP M9050 MFP manual Specks, Dropouts

Specks

Figure 12-71 Specks

Specks might appear on a page after a jam has been cleared.

1.Print a few more pages to see if the problem corrects itself.

2.Clean the inside of the device and run a cleaning page. See Clean the MFP on page 170.

3.Try using a different type of media.

4.Check the print cartridge for leaks. If the print cartridge is leaking, replace it.

Dropouts

Figure 12-72 Dropouts

1.Make sure that the environmental specifications for the device are being met. See Operating environment on page 252.

2.If the media is rough, and the toner easily rubs off, open the Administration menu at the device control panel. Open the Print Quality menu, select Fuser Modes, and then select the media type you are using. See Print Quality menu on page 42.

3.Try using a smoother media.

ENWW Solve print-quality problems 219