7.Adjust the front (X) paper guide by pressing the tab on the guide and slide the guide until it gently touches the paper.

Figure 6-20Load custom media in trays 2, 3, and 4 (5 of 6)

8.Note the orientation of the paper, as well as the value of the X dimension and the Y dimension. The X and Y dimensions are marked in the tray. You will need this information for a later step.

NOTE: When loading tray 4, make sure that the paper guide lock is in the up position.

9.Close the tray. The MFP control panel might show the tray media type and size. If the configuration is not correct, touch Modify on the control panel. If the configuration is correct, touch OK.

Figure 6-21Load custom media in trays 2, 3, and 4 (6 of 6)

ENWW

Load paper and print media

91