Enable the FIH portal
1.
2.Click OK.
3.Click Enable.
4.If you have not entered a PIN before, click No. If you have entered a PIN before, click Yes. If you click No, type and confirm the PIN, and then click OK. If you click Yes, type the PIN and click OK.
NOTE: The PIN must be numeric.
5.Click the appropriate button for the type of connection: Direct or Network. If Direct is selected, type the MFP port. If Network is selected, type the IP address and port for the MFP.
NOTE: The IP address for the MFP can be found on the Configuration page.
If you typed an incorrect IP address, you will receive an error message. Otherwise, the portal is enabled.
Disable the FIH portal
1.
2.Click OK.
3.Click Disable.
4.Type the PIN and click OK.
5.Click the appropriate button for the type of connection: Direct or Network. If Direct is selected, type the MFP port and click OK. If Network is selected, type the IP address and port for the MFP, and then click OK. The portal is disabled.
NOTE: If you lose the PIN number and the portal needs to be disabled, try using the default PIN that is listed to disable it. For assistance, use the HP Instant Support service, which is available through the embedded Web server or at http://instantsupport.hp.com. See Embedded Web server on page 152.
Secure Disk Erase
To protect deleted data from unauthorized access on the MFP hard drive, use the Secure Disk Erase feature. This feature can securely erase print and copy jobs from the hard drive.
Secure Disk Erase offers the following levels of disk security:
●
●Secure Fast Erase. Access to the file is removed, and the data is overwritten with a fixed identical character pattern. This is slower than
●Secure Sanitizing Erase. This level is similar to the Secure Fast Erase mode. In addition, data is repetitively overwritten by using an algorithm that prevents any residual data persistence. This mode will impact performance. Secure Sanitizing Erase meets the U.S. Department of Defense
166 Chapter 11 Manage and maintain | ENWW |