Print Quality menu
Administration > Print Quality
NOTE: Values shown with "(default)" are the
Table
Menu item | Values | Description | |
|
|
|
|
Set Registration | Test Page | Print (button) | Print a test page for setting the registration. Follow the |
|
|
| instructions that are printed on the page to adjust each |
|
|
| tray. |
Source | All trays |
| Tray <X>: <contents> |
| Tray <X>: <contents> |
| (choose a tray) |
Use Set Registration to shift the margin alignment to center the image on the page from top to bottom and from left to right. You can also align the image on the front with the image printed on the back.
Select the source input tray for printing the Set Registration page.
Adjust Tray <X> | Shift from |
| the X or Y axes. 0 is the |
| default. |
Perform the alignment procedure for each tray.
When it creates an image, the device scans across the page from side to side as the sheet feeds from top to bottom into the device.
Fuser Modes | Standby Fuser Mode | 125° Celsius | Set the temperature of the fuser when the MFP is in |
|
| Off | standby mode. |
|
|
| |
|
|
|
|
| <Paper Type> |
| Configure the fuser mode associated with each media |
|
|
| type. |
|
|
|
|
| Restore Modes | Restore (button) | Restore the fuser modes to the default settings. |
|
|
|
|
Resolution |
| 300 | Use this feature to select the print resolution. |
|
| 600 |
|
|
| FastRes 1200 (default) |
|
|
| ProRes 1200 |
|
|
|
|
|
REt |
| Off | Enable Resolution Enhancement technology (REt), |
|
| Light | which produces print output with smooth angles, |
|
| curves, and edges. All print resolutions, including | |
|
| Medium (default) | FastRes 1200, benefit from REt. |
|
|
| |
|
| Dark |
|
|
|
|
|
Economode |
| Enabled | When Economode is enabled, the device prints with a |
|
| Disabled (default) | reduced amount of toner per page; however, the print |
|
| quality of the page is reduced. | |
|
|
|
|
Toner Density |
| Choose from a range of 1 | Lighten or darken the print on the page. 1 is the lightest |
|
| to 5. 3 is the default. | and 5 is the darkest. |
|
|
|
|
Small Paper Mode |
| Normal (default) | Choose Slow to adjust the MFP for printing narrow |
|
| Slow | media. |
|
|
| |
|
|
|
|
42 Chapter 2 Control panel | ENWW |