Installation Instructions
Before operating your wine cooler for the first time, follow these steps:
zRemove the exterior and interior packaging.
zCheck to make sure the following parts are included: 9 7
91 instruction manual
zBefore connecting the unit to a power source, allow it stand upright for approximately 2 hours. This will reduce the possibility of any system malfunctions which may have occurred from handling during transportation.
zClean the interior surface of the unit with lukewarm water and a soft cloth.
zPlace the wine cooler on a leveled surface that will be strong enough to support the unit when it is fully loaded. To level your wine cooler, adjust the front feet located at the bottom of the unit.
zInstall the wine cooler away from direct sunlight and heat sources such as stoves, heaters, or radiators, as direct sunlight may affect the unit’s acrylic coating, and nearby heat sources can increase electrical consumption. Moreover, extreme cold or hot ambient temperatures may also prevent proper performance.
zPLEASE NOTE: This wine cooler is only designed for home use, and is not designed to be placed in a garage or basement.
Electrical Connection
To ensure safety and proper operation, please follow the guidelines listed below:
Warning:
Improper use of the grounded plug can result in electrical shock. If the power cord appears to be damaged, have it replaced by an authorized service center.
•This wine cooler should be properly grounded for your safety, and in order to minimize the possibility of electrical shock, the power cord of this unit is equipped with a
•Never cut or remove the ground wire from the supplied power cord.
•The use of extension cords is not recommended.
•This unit requires a standard
