NewAir G70 owner manual Operation, Setting the Thermostat

Operation

Setting the Thermostat

1.Before connecting or disconnecting plug, turn knob fully counterclockwise. (Figure 4)

2.Heater is equipped with a thermostat. To adjust temperature to your individual requirements, turn thermostat control knob clockwise all the way to turn heater on, the yellow power light will illuminate (Figure 5). When room reaches desired temperature, turn thermostat knob counterclockwise until you hear click. Leave in this position to maintain room temperature at this setting. For additional heat, turn clockwise until you hear click again and heater will turn on. To shut heater off turn thermostat knob counterclockwise all the way. The yellow power indicator light will turn off.

!NOTE: Heater is equipped with a fan delay to dissipate residual heat from the element. Heater fan will run for a brief period after heater has reached room temperature.

Figure 4

Thermostat control knob (shown in off position)

Figure 5 Yellow light

Red light

9