The scope or the | The scope is turned on | Turn off the scope and |
IR illuminator do not | via the remote control. | the IR illuminator using |
turn off via the selector |
| the remote control. |
switch on the scope. |
|
|
The aiming point shifts | The riflescope is not | Check how securely the |
after firing rounds. | mounted securely. | riflescope has been |
|
| mounted and make sure |
|
| that the same type and |
|
| caliber bullets are being |
|
| used as when the scope |
|
| was initially sighted in; |
|
| if your scope was |
|
| sighted in during the |
|
| summer, and is now |
|
| being used in the winter |
|
| (or the other way |
|
| around), a small |
|
| displacement of the |
|
| aiming point is possible. |
The riflescope does not | Wrong settings. | Adjust the riflescope |
focus. |
| according tothe |
|
| instructions given in the |
|
| section, entitled |
|
| “OPERATING |
|
| INSTRUCTIONS” and |
|
| check the surfaces of the |
|
| eyepiece and objective |
|
| lenses and clean them if |
|
| necessary from dust, |
|
| condensation, frost, etc; |
|
| to prevent fogging in |
|
| cold weather, apply a |
|
| special |
22
