Newcon Optik DN 463 operation manual Technical Maintenance, Using the Additional Weaver Rail

11. TECHNICAL MAINTENANCE

Technical maintenance should be done no less than twice a year, and is comprised in the following steps:

Clean the outside metallic and plastic surfaces from dust, dirt and moisture; wipe the scope with a soft cotton tissue, lightly coating it with gun oil or petroleum jelly.

Clean the battery compartment's electric contact points using an oil-free solvent.

Inspect the eyepiece lens, the objective lens and the IR illuminator and gently blow off any dust and sand, and clean using lens cleaner and a soft cloth; see section entitled “GUIDELINES FOR OPERATION”.

12.USING THE ADDITIONAL WEAVER RAIL

The scope has a built-in additional weaver rail mount (14) housed on the left portion of the body. This will allow the mount of additional devices, such as:

IR75, LAM 10, LAM 2, LAM 3

18