18
Mode
Display name
Distance
Speed
Azimuth
Elevation
Reticle
Target
selection logic
Cd 16 Display test
Cd 17 Compass calibration
Gating GAt Entrance into gating mode
Data
Recall rEc Recalls last 10 measurement sets
Data
Clearance cLr Clears all recorded data
Interface
format
-PC- or
PLGr Selects PC or PLGR data format for output port
Empty field means the parameter is not measured in this mode, NC
means ‘no change’ to the measurement parameter setting.
Once set, the mode parameter is stored in on-board memory and
will be kept current until reset in the Setup mode.
Choosing Cd 16 in the Setup mode will cause all display
segments and indicators to flash for 8 seconds. Flashing can be
interrupted by pressing either button.