Interpupillary distance
The unit is designed to accommodate interpupillary distance of
Installation of interchangeable lenses
Do not apply an excessive force when changing the lenses.
1.Make sure the unit is off.
2.Remove the lens cap
3.Detach the current lens: hold the lens by its base (1, Fig.1) and rotate it
4.Screw in (clockwise) new lens.
The threads are very fine (to prevent humidity penetration) and can be damaged easily. Do not apply force to the lens rotation. If lens does not screw in smoothly make sure that the threads match.
Unit is ready for operation immediately after the lens change.
Warning: Forcing installation of the lens may damage the thread and cause costly repairs to both the binoculars and the lens that are not covered by warranty.
11
