Nextar MP907 Connecting the Player to Other Components ,

Connecting the Player to Other Components
How to use the wireless headset
1. Set mode button to FM.
2. Press - / + to select FM frequency.
3. Adjust tuning knob on wireless headset to the right frequency.
Track1 Tr ack2 Tr ack3 Trac k4 Tr ack5
CDs
Track1 Tr ack2 Tr ack3 Trac k4 Tr ack5
CDs
Power
adapter
Power
adapter
Recharging the battery pack
Recharging the battery pack as described below:
1. Connect the power cord to the battery pack.
2. Connect the adapter to the power outlet.
• When recharging starts, the recharge lamp lights in red.
• The recharge lamp lights in blue when recharging completes. Remove the battery pack
and power cord.
• Recharging usually takes about 4-5 hours.
The battery pack can be used for about 300 cycles of recharging and operations, though
this is variable depending on the operation conditions.
Charge the battery pack fully before using it for the first time.
CAUTION
• Place the battery charger on a level, flat surface for recharging.
• Do not short-circuit the terminals of the battery charger.
Notes:
The battery charger is compatible with supply voltages between 100 and 240V AC and can
be used universally. For overseas travel, an adapter may be needed to match the local
outlet requirement (not supplied).
Using the Battery
CAUTION: Switch off the volume switch
of the wireless headset when
you are not using it.
21 22