Nextar N1-107 manual

“Edit” Load the selected picture and enter the Edit mode. You can then use a rectangle to select the desired image to save it in the flash. (For better results, select the rectangle as small as possible. The displayed result as shown in the rectangle box)

Click “Edit”, the picture will be loaded as shown above.

Double-click the picture, the picture will be loaded to the small box, which is the same as displayed in the product.

8

Select the small box, which you want to show on the display. The result will be displayed in the small box as shown in the figure above.

Load : Load the pictures from flash to PC.

Save : Save the pictures from PC to flash.

Exit : Exit the application software.

Note: You must run “save” before exit to save the edited pictures to the flash.

9