Using Your Digital Photo Frame
Install the stand for tabletop display. Connect the AC adaptor.
Insert a memory card in the Digital Photo Frame (with the card’s electrical contacts towards the front of the unit.). A slide show will begin automatically.
To enter the power save, press the
Press the 
button, the word Pause will appear on the screen briefly and the slide show will be stopped. The current photo will remain on the screen until the button is pressed again, at which time the slide show will resume.
To display the previous or next picture, press the | button. |
The Rotate button allows photos to be turned proper viewing. Press repeatedly to rotate the current picture clockwise:
90°
180°
270°.
Viewing Modes
Press the MODE button to select display mode: Pan Scan, Fill, Original and Auto Fit. Press the MODE button and hold for a moment to change the aspect ratio between 16:9 and 4:3.
File Saving
Photos must be saved in the JPEG format in order to be viewed on the Digital Photo Frame. Nearly all digital cameras will save in this format by default. Photos that have been saved with certain image editing programs can fail to display properly.
8
