7
Charging Battery The device has a built-in rechargeable battery. No extra battery installation is
required. Just charge the device when it indicates low battery.
To charge the battery, plug the AC adaptor to any standard wall outlet and the
DC-IN port of the device. It takes about 3 hours to fully charge the battery.
Note:
a. You can operate the device even when it is being charged. But for extended battery life,
it is suggested NOT to use the device when it is charging.
b. It is recommended to charge the battery before you use the device for the first time.
c. For maximum performance, lithium-ion batteries need to be used often. If you don’t use
the device often, be sure to recharge the battery at least once per month.
Besides the built-in memory, this device features a memory card slot for additional
storage space. You can enjoy e-book, music, image or video files directly from an SD
card.
To install a memory card, find the card slot at the bottom of the device and then insert
the memory card into the slot in the correct orientation.
To access the files on the memory card, enter the Explorer mode on the device and
select the “SDCard” directory.
Transferring Files Before reading or playing files, you need to transfer media files from a computer to
the device.
(1) Connect the device to a computer with the supplied USB cable. This device will
turn on and ask you if you want to connect it or not. Choose “Connect” to connect
it.
(2) Once connected, two removable disk drives will show on your computer. One
represents the internal memory of the device, and the other represents the
memory card inserted into the device. Now you can copy files from or to these
disk drives just as you would on your hard drive.
(3) Once the data transfer completes, drag from the top bar downwards to display the
USB notification message as shown.
(4) Choose “Turn off USB Storage” and then tap“Turn Off” to disconnect the device
from computer.
Drag downwards