HDP-1 Specifications

·System Type: 2-way acoustic suspension, hybrid dipole design

·Driver Complement: 4.5” long-throw woofer, two 3” mid-tweeters

·Crossover: 400Hz, 6db/octave high-pass and low-pass

·Response: 105Hz - 10KHz, +/- 3dB

·Sensitivity: 86db (2.83V at 1M)

·Power Rating: 10W/ch minimum, 100W/ch maximum

·Impedance: 8 ohms nominal,

4.4ohms minimum

·Inputs: Spring clips

·Weight: 7.5 lbs. each

·Dimensions: 9.25"H x 5.75"W x 5.75"D

·Finish: High gloss black or white laminate

Specifications are subject to change without notice, in accordance with our policy of continuously upgrading the performance of our products.

other. If different types of cables are placed near each other at some place in your system, separate them by the maximum practical distance and cross them at right angles where they meet. Do not twist or tie AC power cords with speaker cables.

!Operation

The HDP-1 was designed to handle a wide range of listening levels, but every speaker has limits. It is important to use common sense and listen for signs of possible distress from the speakers. Underpowered amplifiers are most often the cause of speaker damage. For example, a 60-watt amplifier runs out of power when called upon to produce more than 60 watts, and the resulting distortion can damage the speaker. If you tend to listen at high voumes, more powerful amplifiers are preferable because they are less likely to run out of power.

Noticeable distortion or harsh breakup is an indication that either your amplifier or your speakers are running beyond their capacity, and the volume should be decreased. If you can feel any heat emanating from the woofer or tweeter, reduce the level immediately. Speaker damage most often occurs from sustained high volume levels, not from transient sounds or brief musical peaks. Excessive boost- ing of bass, treble or equalizer controls can worsen the problem, and is not recommended.

!Maintenance

Your speakers require minimal maintenance under normal use. The cabinet may be cleaned using a damp cloth or a mild, non-abrasive glass cleaner. To clean the grille, first remove it from the speaker, then brush lightly with a soft brush or use a vacuum on its lowest setting. Do not expose the speaker to direct sunlight, high temperatures, or moisture. Do not attempt to clean the actual drivers.

Limited Warranty

Valid Only in the U.S.A.

Warranty Period

For the period of 5 years for parts and 5 years for labor from date of original purchase (the war- ranty period) from an authorized NHT dealer, Now Hear This (NHT) warrants that if our product fails to function properly under normal use due to a manufacturing defect when installed and operated according to the owner’s manual instructions enclosed with the unit, it will be repaired or replaced with a unit of comparable value at the option of NHT without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of NHT.

What’s Not Covered

This warranty does not cover any product which is used in any trade or business, or in an industrial or commercial application.

This warranty does not cover the cabinet or any appearance item, or any damage caused to the product resulting from: alterations, modifications not authorized in writing by NHT, accident, misuse or abuse, damage due to lightning or power surges, or being subjected to power in excess of the speaker’s published power rating.

This warranty does not cover the cost of parts which would otherwise be provided without charge under this warranty, obtained from any source other than an authorized NHT service location. This warranty does not cover defects or damage caused by the use of unauthorized parts or labor or from improper maintenance.

Altered, defaced or removed serial numbers void this warranty.

Your Rights

The liability of NHT will be limited to the purchase price of the product, and NHT will not be liable for incidental or consequential damages. NHT limits its obligations under any implied warranties under state laws to a period not exceed the warranty period. Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages. The above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

To Obtain Service

NHT has appointed a number of authorized service companies throughout the USA should your product ever require service. To receive warranty service, you will need to present your sales receipt showing place and date of original owner’s transaction.

To find the name and address of the nearest authorized NHT service location, call or write:

Customer Service Department, Now Hear This, 535 Getty Court, Benicia, CA 94510.

1-800-NHT-9993.

Please do not return product to this address. It’s not a service location.

Keep this warranty with your sales receipt.

Record date and place of purchase for future reference.

HDP-1

Hybrid Dipole Surround

Loudspeaker

Owner’s Manual

Now Hear This

6400 Goodyear Road

Benicia, CA 94510

800-NHT-9993

Page 2
Image 2
NHT HDP-1 Maintenance, Limited Warranty Valid Only in the U.S.A, Warranty Period What’s Not Covered, To Obtain Service

HDP-1 specifications

The NHT HDP-1 is an advanced digital audio player and headphone amplifier designed for audiophiles seeking high-fidelity sound on the go or within their listening setups. This sophisticated device incorporates a blend of cutting-edge technology and user-friendly features, making it a standout choice in the competitive audio industry.

One of the defining characteristics of the NHT HDP-1 is its high-resolution audio playback capability. Supporting a wide range of formats, including PCM and DSD, the HDP-1 ensures that users can enjoy their favorite music in stunning detail. It boasts a 24-bit/192kHz DAC (digital-to-analog converter), which delivers accurate and precise sound reproduction, allowing listeners to experience their tracks as intended by the artists.

The device features a robust headphone amplifier with an output impedance that caters to a variety of headphone types. This versatility makes the HDP-1 suitable for both high-impedance studio headphones and lower-impedance consumer models, providing sufficient power to drive them with clarity and without distortion. Users can expect a dynamic soundstage and excellent transient response, enhancing the listening experience significantly.

In terms of connectivity, the NHT HDP-1 comes equipped with multiple input options, including USB, optical, and coaxial inputs. This diversity enables seamless integration with various devices, such as computers, televisions, and gaming consoles. The USB input also supports compatibility with mobile devices, allowing users to access their favorite audio content effortlessly.

The user interface of the HDP-1 is intuitive, featuring a simplified control layout that allows for easy navigation through menus and settings. The device includes a digital display that provides essential information about the current playback format and input selection.

Additionally, the NHT HDP-1 is built with a sturdy and sleek chassis, combining aesthetic appeal with durability. The compact design makes it easily portable, suitable for home use or travel. The attention to detail in both design and performance makes the HDP-1 a worthy investment for those who value high-quality audio.

With its exceptional sound quality, versatile connectivity, and user-friendly design, the NHT HDP-1 stands out as an impressive audio solution for enthusiasts and casual listeners alike.