(1)Power Switch - Activates power for subwoofer
(2)AC Power Input - Power cord receptacle.
(3)Subwoofer Input - Input for RCA connector from Controller.
(4)Power Indicator - The light shows green when the system is on, shows red in standby
(5)Standby Indicator - The amber light is lit when the subwoofer is in standby mode.
(6)Power Indicator - The green light is lit when the system is on.
(7)Volume Control - Adjusts the loudness of the subwoofer independently of the main speakers.
(8)Flat / Video Contour Switch - Selects response mode of subwoofer.
(9)LFE Gain Control - Adjusts amount of LFE in the mix
(10)Power Input - To accept power from the LL1 power supply
(11)Subwoofer Phase Selector -
(12)Low Pass Filter - Continuously variable low pass crossover control.
(13)LFE Input - Line Level RCA Low Frequency Effects input.
(14)Line In -
(15)Satellite Line Out -
(16)Output to Satellites - Barrier strip for
(17)High Level Input - Barrier strip for
(18)Subwoofer Gain Selector - Allows optional attenuation of SubOne i gain.
(19)High Pass Filter -
(20)Subwoofer Output - RCA cable for connection to SubOne i subwoofer.
3