fig. 2

fig. 1

When installing the VS-2a as a center channel speaker, it should be placed directly above or below the television, as close to the screen as possible (fig.1). The speaker should always be placed so that the tweeter and absorptive foam strip are facing the screen. The VS-2a is magnetically shielded and will not distort the picture’s color.

Ideally, the three front speakers in a home theater system should be placed at equal height, equidistant, and at ear level from the listening position. However, it is frequently not possible to install a center speaker at ear level, as the top surface of most televisions tends to be higher than ear level in the seated position. To address this problem, the VS-2a is supplied with an adjustable foot (fig. 2). This foot is used to angle or aim the speaker so that it radiates sound directly toward the listening position. The foot can also be used to level the VS-2a if the top of the TV has an uneven surface. Attach the rub- ber pad to the bottom of the foot to prevent it from sliding. Adjust the VS-2a to the desired angle, then tighten the finger screws. For best performance, place the VS-2a so that its baffle (front) is even with the front of your television (fig. 4). This will eliminate diffraction effects caused by sound waves bouncing off the top surface of your television. Rubber feet are included to protect both your VS-2a and your furniture from possible scratches. To install the feet, peel off their adhesive backings and stick them on four corners of the bottom surface (whichever it is) of the VS-2a.

When used as front or rear satellite speakers, the VS-2a’s should be arranged as symmetrically as possible. The speak- ers should be slightly toed-in and the drivers should face the listening area without obstruction from furniture. When used in their vertical (upright) orientation, the VS-2a’s should always be placed so that the tweeters face the middle of the room (fig. 3). If possible, arrange the speakers so that the distance between the listener and the center or the speaker plane is about 1.5 times the distance between the two speakers (fig. 4). This configuration puts the listener in the center of the stereo image.

fig. 3

fig. 4

For digital 5.1-channel surround systems, we recommend that all five speakers be placed equidistant from the listening position. For Dolby Pro-Logic®systems, it is preferable to have a more diffuse, ambient sound radiating from behind the listening position. This is accomplished by placing the rear (surround) speakers so that they fire across the room at each other (not directly toward the seating position), and by placing them 3 to 4 feet above ear level.

3

Page 2 Page 4
Page 3
Image 3
NHT VS-2a owner manual
Page 2 Page 4

VS-2a specifications

The NHT VS-2a is a notable speaker model that has garnered attention for its impressive audio performance and elegant design. As part of NHT's lineup, the VS-2a is engineered to deliver high-quality sound reproduction, making it suitable for both music enthusiasts and home theater systems.

One of the main features of the NHT VS-2a is its unique cabinet design. The speaker's enclosure is constructed from high-quality MDF, which helps to minimize resonance and unwanted vibrations. This cabinet design contributes to the overall clarity of sound, ensuring that every note and tone is faithfully reproduced. The speaker is also finished in a sleek, modern veneer, making it an aesthetically pleasing addition to any room.

In terms of technology, the NHT VS-2a employs a 5.25-inch polypropylene cone woofer, which is designed to provide deep, punchy bass response. This dedicated woofer is complemented by a 1-inch silk dome tweeter, which offers smooth and detailed high frequencies. Together, these drivers are carefully engineered to achieve a balanced sound signature, allowing listeners to enjoy a full range of audio dynamics.

Another notable characteristic of the VS-2a is its versatility. The speaker is designed to function effectively in a variety of listening environments, whether as a pair of standalone bookshelf speakers or as part of a larger multi-channel audio setup. This adaptability makes the NHT VS-2a an excellent choice for various applications, including music listening, movie watching, and gaming.

The NHT VS-2a also boasts a frequency response ranging from 55 Hz to 20 kHz, ensuring that both low and high frequencies are represented faithfully. With a sensitivity rating of 87 dB, the speaker can be driven effectively by a wide range of amplifiers and receivers, making it accessible to a broad audience.

Overall, the NHT VS-2a represents a blend of advanced technology and elegant design. Its commitment to sound quality, coupled with its versatility and aesthetic appeal, makes it a standout option in the competitive speaker market. Whether for casual listening or critical audio evaluation, the NHT VS-2a delivers performance that genuinely enhances the listening experience.
Top Page Image Contents