•Before using the lens, always check that at least one of the bayonet- mount filters (four are supplied) is attached to the rear of the lens.

SPECIFICATIONS

Focal length: 1 3mm

Maximum aperture: f/5.6

Lens construction: 16 elements in 12 groups

Picture angle: 118°

Distance scale: Graduated in meters and feet from 0.3m (1 ft) to infinity (°°)

Aperture scale: f/5.6 ~ f/22 on both standard and aperture-direct-readout scales

Diaphragm: Fully automatic

Exposure measurement: Via full-aperture method; meter coupling ridge provided for AI cameras and meter coupling shoe for non-AI cameras

Lens hood: Non-removable type built into front of lens

Filters: Provided with a set of four bayonet-mount filters for attachment to the rear of the lens; set includes

L1 BC, 0 5 6 , A2 and B2 filters; one filter must be in place at all times

Mount: Nikon bayonet mount

Dimensions: 115mm0 x 99mm long (overall); 88.5mm extension from flange

Weight: Approx. 1200g

Accessories

Slip-on front lens cap

Rear lens cap LF-1

Bayonet-mount filter set (L1 BC, 0 5 6 A2 B2)

Filter set case CA-2

Hard lens case CL-14

Teleconverter TC-200

LENS CARE

•Although you should always keep the lens surfaces clean, rough cleaning must be avoided. Wipe with a soft, clean cotton cloth moistened with alcohol to remove grease or fingerprints from the lens surfaces.

If you use ether in cleaning the lens, a smudge sometimes appears on the surface of a multi-coated lens. If this happens, wipe it again with a cotton cloth moistened with alcohol.

•Keep the lens cap in place whenever the lens is not in use.

•Attach both the front and rear caps when the lens is stored separately.

•To ensure proper fit of the lens when stored in the leather lens case, set the lens' focusing ring to the infinity (°°) setting.

9