Error Messages

Refer to the table below if an error message is displayed.

 

 

Display

Cause/Solution

A

 

 

Memory card is write

The write-protect switch is in the “lock” position.

–

 

 

protected.

Slide the write-protect switch to the “write” position.

 

 

 

 

 

 

 

 

 

 

This card cannot be

An error occurred while accessing the memory card.

 

 

 

used.

• Use an approved card.

6,

 

 

This card cannot be

• Check that the terminals are clean.

F19

 

 

read.

• Confirm that the memory card is correctly inserted.

 

 

 

 

 

 

 

 

 

The memory card has not been formatted for use in the

 

 

 

 

camera.

 

 

 

Card is not formatted.

Formatting deletes all data saved on the memory card. If you

 

 

 

need to keep copies of any images, make sure to select No

F6

 

 

Format card?

Reference

 

and save the copies to a computer or other medium before

 

 

 

 

 

 

formatting the memory card. Select Yes and press the

 

 

 

 

 

 

 

 

kbutton to format the memory card.

 

 

 

 

 

 

Section

 

card is locked.

The write-protect switch of the Eye-Fi card is in the “lock”

–

 

An error occurred while accessing the Eye-Fi card.

 

 

Not available if Eye-Fi

position.

 

 

 

• Check that the terminals are clean.

6

 

 

 

 

 

 

 

 

 

• Confirm that the Eye-Fi card is correctly inserted.

 

 

 

 

 

 

 

 

Out of memory.

Delete images or insert a new memory card.

6, 17

 

 

 

 

 

 

E76