Problem

 

Cause/Solution

A

 

 

Camera is off.

21

 

 

Battery exhausted.

20

 

 

Standby mode for saving power: Press the power

2, 21

 

 

 

switch, the shutter-release button, c(shooting/

 

 

 

 

playback mode) button, or b(emovie-record)

 

 

Monitor is blank.

 

button.

 

 

When flash lamp flashes, wait until flash has

36

 

 

 

 

 

charged.

 

 

 

Camera and computer are connected via USB

68, 73

 

 

 

cable.

 

 

 

Camera and TV are connected via audio/video

68, E50

 

 

cable.

 

 

 

 

 

 

 

Monitor is hard to read.

Adjust monitor brightness.

84, E40

Monitor is dirty. Clean monitor.

F8

 

 

 

 

 

 

If camera clock has not been set, Oflashes when

 

 

 

 

shooting images and recording movies. Images

 

 

 

 

and movies saved before clock is set are dated “00/

 

 

Date and time of recording

 

00/0000 00:00” or “01.01.13 00:00” respectively. The

 

 

 

shooting date and time of still images is not

16, 84,

 

are not correct.

 

displayed during playback. Set the correct time and

E39

 

 

date using Date and time in the camera settings

 

Technical

 

 

menu.

 

 

Check camera clock regularly against more

 

 

 

 

 

 

accurate timepieces and reset as required.

 

 

 

 

 

 

Print date not available.

Date and time in the camera settings menu has not

16, 84,

IndexandNotes

been set.

E39

 

 

 

 

 

 

F11