Nikon AF-S Built-inFlash Units, The Lens Hood, Jp En De Fr Es Sv Ru Nl It Cz Sk Ro Ua Ck Ch Kr

Jp

En

De

Fr

Es

Sv

Ru

Nl

It

Cz

Sk

Ro

Ua

Ck

Ch

Kr

■Built-in Flash Units

When using the built-in flash on cameras equipped with a built-in flash unit, shoot at ranges of 0.6 m (2 ft.) or more and remove the lens hood to prevent vignetting (shadows created where the end of the lens obscures the built-in flash).

Camera	Use at ranges of
F60-series/N60 *, F/N65-series *	1.5 m/4 ft. 11 in. or more
F50-series/N50 *	3.0 m/9 ft. 10 in. or more
F/N55-series *	2.0 m/6 ft. 7 in. or more
F-401x/N5005 *, F-401s/N4004s *, F-401/N4004 *	Lens causes vignetting at all ranges

* N-series cameras sold in U.S.A. only.

■The Lens Hood

The lens hoods protects the lens and blocks stray light that would otherwise cause flare or ghosting.

Align the lens hood lock mark (—{) with the lens hood mounting mark (●) on the lens (e).

When attaching or removing the hood, hold it near the symbol on its base and avoid gripping it too tightly. Vignetting may occur if the hood is not correctly attached.

The hood can be reversed and mounted on the lens when not in use. When the hood is reversed, it can be attached and removed by rotating it while holding it near the lock mark (—{).

16