Nikon COOLPIX 2500 manual Before Connecting the Camera, Use a Reliable Power Source

4 Turn the computer on

Turn the computer on and wait for the operating system to start up.

5 Connect the camera and computer

Connect the UC-E3 USB cable as shown below. Use the flat connector for connection to the computer, and connect the other end of the cable to the camera’s USB connector. Do not connect the camera via a USB hub or keyboard.

6 Turn the camera on

Slide the mode selector to or . If the UC- E3 is connected, the monitor will remain off,

and all controls except the () button and power switch will be inactive.

Connections

Before Connecting the Camera

Before connecting your camera to a computer, make sure that Nikon View 5 is installed.

Use a Reliable Power Source

When transferring data between the camera and the computer, be sure that the battery is fully charged. If in doubt, recharge the battery before begin- ning transfer or use the optional EH-60 AC adapter.

45