Nikon D3100 2 manual Measure white balance, Check the results

When the camera is ready to measure white balance, a flashing D(L) will appear in the viewfinder and information display.

5Measure white balance.

Before the indicators stop flashing, frame the reference object so that it fills the viewfinder and press the shutter-release button all the way down. No photograph will be recorded; white balance can be measured accurately even when the camera is not in focus.

6Check the results.

If the camera was able to measure a value for white balance, the message shown at right will be displayed and a will flash in the viewfinder for about eight seconds before the camera returns to shooting mode. To return to shooting mode immediately, press the shutter-release button halfway.

If lighting is too dark or too bright, the camera may be unable to measure white balance. A message will appear in the information display and a flashing b a will appear in the viewfinder for about eight seconds. Return to Step 4 and measure white balance again.

t

91