210
*The WR-R10 wireless remote controller can not be attached at the same time as a WU-1a
wireless mobile adapter or ME-1 stereo microphone.
Attempting to forcibly attach
accessories can damage the camera or accessory.
Remote
controls/
wireless
remote
controller
Wireless Remote Control ML-L3 (031): The ML-L3 uses a 3 V CR2025 battery.
Pressing the battery-chamber latch to the right (q), insert a fingernail into the
gap and open the battery chamber (w).
Ensure that the battery is inserted in
the correct orientation (r).
Wireless Remote Controller WR-R10*/WR-T10: When a WR-R10 wireless remote
controller is attached, the camera can be controlled wirelessly using a WR-T10
wireless remote controller (032, 175).
Insert a fingernail into the gap behind the battery-chamber latch and open the
battery chamber (q).
Ensure that the battery is inserted in the correct
orientation (e).
Microphones Stereo Microphone ME-1 (0104)*
Accessory
terminal
accessories
The D5200 is equipped with an accessory terminal for
WR-R10 wireless remote controllers (0175), MC-DC2 remote
cords (060), and GP-1 GPS units (0175), which connect
with the 4 mark on the connector aligned with the 2
next to the accessory terminal (close the connector
cover when the terminal is not in use).
USB and A/V
connector
accessories
UC-E17 and UC-E6 USB cables (0134)
Wireless Mobile Adapter WU-1a*: Supports two-way communication between the
camera and smart devices running the Wireless Mobile Adapter Utility.