First Steps

Always turn the camera off before inserting or removing batteries or memory cards.

1Attach the strap.

Attach the strap as shown. Repeat for the second eyelet.

2Charge the battery.

If a plug adapter is supplied, raise the wall plug and connect the plug adapter as shown below at left, making sure the plug is fully inserted. Insert the battery and plug the charger in. An exhausted battery will fully charge in about an hour and 50 minutes.

Battery charging

Charging complete

DDuring Charging

Do not move the charger or touch the battery during charging. Failure to observe this precaution could in very rare instances result in the charger showing that charging is complete when the battery is only partially charged. Remove and reinsert the battery to begin charging again.

9