Nikon Using ViewNX, 3Click Start Transfer, 1Connect the USB cable, 4Terminate the connection, 2Start Nikon Transfer 2 component of ViewNX, AWindows, Import File

Using ViewNX 2

Copy Pictures to the Computer

Before proceeding, be sure you have installed the software on the supplied ViewNX 2 CD (0 59).

1Connect the USB cable.

After turning the camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown and then turn the camera on.

2Start Nikon Transfer 2 component of ViewNX 2.

If a message is displayed prompting you to choose a program, select Nikon Transfer 2.

AWindows 7

If the following dialog is displayed, select Nikon Transfer 2 as described below.

1Under Import pictures and videos, click Change program. A program selection dialog will be displayed; select Import File using Nikon Transfer 2 and click OK.

2Double-click Import File.

3Click Start Transfer.

At default settings, pictures on the memory card will be copied to the computer.

ADuring Transfer

Do not turn the camera off or disconnect the

USB cable while transfer is in progress.

Start Transfer4Terminate the connection.When transfer is complete, turn the camera off and disconnect the USB cable.

61