Nikon D7100 f6: Release Button to Use Dial, f7: Slot Empty Release Lock, f8: Reverse Indicators, AF-L, AF-L, AAE-L, AAE-L, Choose, Active, Choose, Assign, button, non-CPU

f6: Release Button to Use Dial

Gbutton ➜ ACustom Settings menu

If Yes is selected, adjustments that are normally made by rotating the command dial while holding a button can instead be made by rotating the command dial after the button is released (setting ends when the button is pressed again, the shutter-release button is pressed halfway, or the standby timer expires). The following buttons are affected: the E, M(Y), W(S), X(T), L(U), AF-mode, Z(Q), or D, Fn,

preview, and AAE-L/AF-Lbuttons. The Fn and preview buttons are only affected when assigned Choose image area, Choose non-CPU lens number, Active D-Lighting, or HDR (high dynamic range) using Custom Setting f2 (Assign Fn button) or f3 (Assign preview button). The AAE-L/AF-Lbutton is only affected when assigned Choose image area or Choose non-CPU lens number using Custom Setting f4 (Assign AE-L/AF-L button). Note that the standby timer will not expire when No limit is selected for Custom Setting c2 (Standby timer).

f7: Slot Empty Release Lock

Gbutton ➜ ACustom Settings menu

Selecting Enable release allows the shutter to be released when no memory card is

inserted, although no pictures will be recorded (they will however be displayed in the monitor in demo mode). If Release locked is selected, the shutter-release button is

only enabled when a memory card is inserted in the camera.

f8: Reverse Indicators

Gbutton ➜ ACustom Settings menu

If (W) is selected, the exposure indicators in the control panel,

viewfinder, and information display are displayed with negative values on the left

and positive values on the right. Select	(V) to display positive
values on the left and negative values on the right.

U

258