Image Sensor Cleaning

If you suspect that dirt or dust on the image sensor is appearing in photographs, you can clean the sensor using the Clean image sensor option in the setup menu. The sensor can be cleaned at any time using the Clean now option, or cleaning can be

performed automatically when the camera is turned on or off.

❚❚“Clean Now”1 Select Clean image sensor in the setup menu.

Press the Gbutton to display the menus. Highlight Clean image sensor in the setup

menu and press 2.

Gbutton

2Select Clean now.

Highlight Clean now and press J. The camera will check the image sensor and then begin cleaning. During this time, P flashes in the control panel and other operations can not be performed. Do not remove or disconnect the power source until cleaning is complete and Pis no longer displayed.

APlace the Camera Base Down

Image sensor cleaning is most effective when the camera is placed base down as shown at right.

n

313