lFlash Photography

Using the Built-in Flash

The built-in flash has a Guide Number (GN) 12/39 (m/ft, ISO 100, 20 °C/68 °F) and provides coverage for the angle of view of a 16 mm lens. It can be used not only when natural lighting is inadequate but to fill in shadows and backlit subjects or to add a catch light to the subject’s eyes.

❚❚Using the Built-in Flash: i, k, p, n, o, s, w, and gModes1Choose a flash mode (0 120).2Take pictures.

The flash will pop up as required when the shutter-release button is pressed halfway, and fire when a photograph is taken. If the flash does not pop up automatically, DO NOT attempt to raise it by hand. Failure to observe this precaution could damage the flash.

❚❚Using the Built-in Flash: P, S, A, M, and 0Modes
1 Raise the flash.

l

Press the M(Y) button to raise the flash.

2 Choose a flash mode (P, S, A, and M modes only; 0 120).
3 Take pictures.

M(Y) button

The flash will fire whenever a picture is taken.

AMetering

Select matrix or center-weighted metering to activate i-TTL balanced fill-flash for digital SLR. Standard i-TTL flash for digital SLR is activated automatically when spot metering is selected (0 122).

119