Optional Flash Units (Speedlights)

The camera supports the Nikon Creative Lighting System (CLS) and can be used with CLS-compatible flash units. Optional flash units can be attached directly to the camera accessory shoe as described below. The accessory shoe is equipped with a safety lock for flash units with a locking pin.

1 Remove the accessory shoe cover.2 Mount the flash unit on the accessory shoe.

See the manual provided with the flash unit for details. The built-in flash will not fire when an optional flash unit is attached.

AThe AS-15 Sync Terminal Adapter

When the AS-15 sync terminal adapter (available separately) is mounted on the camera accessory shoe, flash accessories can be connected via a sync terminal.

D Use Only Nikon Flash Accessories

 

Use only Nikon flash units. Negative voltages or voltages over 250 V applied to the accessory

 

shoe could not only prevent normal operation, but damage the sync circuitry of the camera

 

or flash. Before using a Nikon flash unit not listed in this section, contact a Nikon-authorized

n

service representative for more information.

303