73
Detailed Operation
Locked exposure area in each metering system
Spot Metering
•In Single Area AF mode (x52), Dynamic AF mode (x52) or Manual focus (x
61) with CPU lens:
Exposure at the selected focus area
•In Group Dynamic AF mode (x52) with CPU lens:
Exposure at the center focus area of the selected focus group
•In Dynamic AF mode with Closest-Subject Priority (x53), with non-CPU lens is
used (x39) or when “Other screen” is selected in Custom setting “b6: Screen
comp.” (x98):
Exposure at the center focus area
Center-Weighted Metering
Exposure at 12mm-diameter circle at center
Available functions in Auto Exposure Lock with each exposuremode
•¡(Programmed Auto): Flexible Program (x64)
•™(Shutter-Priority Auto): Shutter speed adjustment
•£(Aperture-Priority Auto): Aperture adjustment
In any of these three situations, controlled shutter speed and/or aperture will be
displayed.
Auto Exposure Lock in autofocus operation
•Focus Lock (x58) is simultaneously activated. Confirm /in the viewfinder.
CSM c1: Auto Exposure Lock can be set to be activated by lightly pressing the
shutter release button (x99).
CSM c2: Operation when the AE/AF-L button is pressed can be changed as
follows (x99).
•Only exposure is locked.
•Exposure remains locked until shutter is released, exposure meter turns off or
AE/AF-L button is pressed again.
•Exposure remains locked until exposure meter is off or AE/AF-L button is pressed
again (pressing shutter release button does not release the lock).
•Only focus is locked.
P930_En 04.10.19 7:19 PM Page 73