Mode shake-Anti

Anti-shake Mode

Shooting in Anti-shake Mode

For anti-shake mode, press F when the camera is in the auto mode, scene mode, movie mode and one-touch portrait mode. Anti-shake mode reduces the effects of camera shake and blurred subjects, and produces clear images. This mode reduces blur when shooting subjects in motion. Use it to freeze wildflowers swaying in the wind, or combine it with the zoom to capture a person’s natural expression.

•When this mode detects camera shake, [VR] (vibration reduction) (c 100) and [BSS] (best shot selector) (c 82) are enabled. VR compensates blurred images.

•The higher sensitivity is set and the shutter speed will be faster than in L (auto) mode.

•Flash mode and self-timer are set to off.

1 Press F.

The camera enters anti-shake mode. Press again to

 

return to the shooting mode selected with the mode

ON

selector.

2 Frame the subject and take the

 

picture.

 

While the shutter-release button is held

 

down, the camera takes a maximum of ten

 

shots. They are then compared and the

 

sharpest picture (the picture with highest

12

level of detail) is saved.

 

jNotes on Anti-shake Mode

•Shutter speed is limited to a certain value for dark subjects.

•Pictures taken in this mode may become somewhat grainy.

•Even if [Date imprint] (c 98) is enabled, the date will not be imprinted.

jBSS

BSS may not produce the desired results if the subject moves or the composition changes while the shutter-release button is pressed all the way down.

lImage Mode in Anti-shake Mode

When m is pressed in anti-shake mode, the menu is displayed to enable set the image

38mode (c 77). Changes made to these settings apply to all shooting modes.