Connecting to a Computer
For Users of Windows 2000 Professional
Use a card reader or similar device to transfer the pictures stored on the memory card to the computer.
If the memory card has a capacity greater than 2 GB, or is
•At the Nikon Transfer default settings, Nikon Transfer will start automatically when a memory card is inserted into the card reader or similar device. See step 5 above to transfer pictures.
•Do not connect the camera to the computer. If the camera is connected to the computer, the Found New Hardware Wizard dialog will be displayed. Select Cancel, close the dialog, and disconnect the camera from the computer.
•To transfer pictures stored in the camera’s internal memory to the
computer, the pictures must first be copied to a memory card using the camera (A89).
DUsing Standard OS Operations to Open Camera Files
Navigate to the folder on the computer’s hard disk to which pictures were saved and open a picture in the viewer supplied with your operating system.
DPanorama Creation with Panorama Maker
•Use a series of pictures taken using the Panorama assist option in scene mode (A38) to create a single panorama photo with Panorama Maker.
•Panorama Maker can be installed to a computer using the supplied Software Suite CD.
•After installation is complete, follow the procedure described below to start Panorama Maker.
Windows
Open All Programs (Programs under Windows 2000) from the Start menu > ArcSoft Panorama Maker 4 > Panorama Maker 4.
Macintosh
Open Applications by selecting Applications from the Go menu, and
•For more information on using Panorama Maker, refer to the
DImage File Names and Folder Names
Printers and Computers Televisions, to Connecting
See, “Image File and Folder Names” (A92) for more information. | 53 |
|