•For F5 cameras, only
•When using the Band Efocusing screens in cameras other than those listed above, refer to the columns for the Band Escreens.
•Lens care
•Be careful not to allow the CPU contacts @) to become dirty or damaged.
•If the lens mount rubber gasket ® is damaged, be sure to visit the nearest
•Clean lens surfaces with a blower brush. To remove dirt and smudges, use a soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner. Wipe in a circular motion from the center to outer edge, taking care not to leave traces or touch other parts of the lens.
•Never use organic solvent such as thinner or benzene to clean the lens.
•NC filters are available to protect the front lens element. The lens hood also helps to protect the front of the lens.
•When storing the lens in its flexible lens pouch, attach both the front and rear lens caps.
•When the lens is mounted on a camera, do not pick up or hold the camera and lens by the lens hood.
•When the lens will not be used for an extended period of time, store it in a cool, dry place to
prevent mold and rust. Be sure to store the lens ,. away from direct sunlight or chemicals such as IiII camphor or naphthalene.
•Do not get water on the lens or drop it in water as this will cause it to rust and malfunction.
•Reinforced plastic is used for certain parts of the lens. To avoid damage, never leave the lens in an excessively hot place.
•Standard accessories
•58mm
•Rear Lens Cap
•Bayonet Hood
•Flexible Lens Pouch
•Optional accessory
•58mm
15
