
Using the Flash
BThe W(Off) IndicatorTurn vibration reduction (A107) [Off] when using a tripod. Note the following when lighting is poor and the flash is [OFF] (W):
•Place the camera on a flat, level surface or use a tripod (recommended).
•The Eis displayed when the camera automatically increases sensitivity to minimize blur caused by slow shutter speed. Pictures taken when Eis displayed may be slightly mottled.
BNote on Using the FlashWhen using the flash at a
The flash lamp indicates flash status when the
• On: Flash will fire when picture is taken.
• Blinks: Flash charging. Wait a few seconds and
try again.
• Off: Flash will not fire when picture is taken. If remaining battery level is low after using the
flash to shoot, the monitor will turn off and the flash lamp will blink until the flash has finished charging.
CThe Flash Mode SettingThe default setting is U(auto) (except for some modes in scene mode).
When flash mode is applied in a scene mode, the setting is only enabled until another shooting mode is selected or the camera is turned off. Switching to another shooting mode or turning the camera off enables the default flash setting for all modes.
CThe COOLPIX S510 is equipped with an advanced
•Not recommended when
•
•In some rare cases, other portions of pictures may be affected.
Use flash modes other than auto with
Mode Auto Playback: and Photography Basic
29