Nikon SB-10 instruction manual

With the Nikon F2-series camera, a bu iIt-in selector mechanism controls the speedlight sync adjustment automatical ly as you change shutter speeds: simply rotate the shutter-speed dial to the desired setting slower than 1/ 80 sec . The red line between 1/ 60 and 1/ 125 indicates 1/ 80 sec. A hot-shoe contact built into the mounting foot of the 58-10 eliminates the need for a sync cord, although the unit requires the Flash Unit Coupler AS-' for use with F2 -series cameras .

With the Nikon F, the sync selector is used to adjust the camera for use with speed lights. First set the shutter speed at 1/ 60 sec. or slower. Then Iift and turn the knurled sync se lector ring around the shutter -speed dial of the camera until the FX mark appears in the se lector window. (The Photomic FTN finder must be removed to gain access to t he sync selector ring.) A hot-shoe contact built into the mount- ing foot of the 58-10 eliminates the need for a sync cord, a lthough the unit requires the Flash Unit Coup ler AS-1 for use with the Nikon F.

10