TECHNICAL INFORMATION-continued__
Sync/Multiple Flash Terminals ®
Two standard Nikon screw-type terminals are provided on the S8-140 Speedlight. Use either terminal to connect the S8-140 to the camera, and if necessary, use the other to connect the S8-140 with another flash unit in series for multiple flash operation .
When using the Nikon Speedlight S8-11 , S8-12, S8-14, S8 -15 S8-16A, S8-168, S8-17, or another S8-140 as a secondary unit, connect the flash units together using the Sync Cord SC-11 or SC-15.
In multiple flash operation, be sure to use both flash units on manual.
Bracket Mounting Adapter ®
To detach the flash unit for off-camera flash operation, push the releasellocking wheel @ to the left and while holding it, tip the flash forward until the two white dots are aligned- then pull the flash unit away from the bracket.
To detach the bracket mounting adapter from the flash unit's handle (\1 , use a standard screwdriver to loosen the two screws (j) on the face of the adapter.
