T A B L E T O P S T E R E O V O L U M E C O N T R O L
T A B L E T O P S T E R E O V O L U M E C O N T R O L
“TECH TIP”
Wire size is expressed
by it’s AWG
(American
Wire Gauge)
number. The lower the AWG number, the larger the wire, i.e., 12 AWG wire is physically larger
Mounting Location
Convenient mounting locations for the
•With other stereo components
•Near a desk
•At your bedside
•Close to a telephone
Installation
1. Select a convenient location for the | |
2. | Run all the necessary wiring to the |
| for future reference. See (Figure 1). |
3. | Locate the connector plugs (and remove them if they are |
| plugged in). See Figure 6. |
4. | Strip 1/4" of insulation from the end of each wire. Tightly |
Recessed
area for custom room labels.
Attractive
12 position volume control provides greater attenuation than conventional 10 position designs.
than 14 AWG.
twist the end of each wire until no frayed ends remain. |
5. Use a small flathead screwdriver or your thumbnail to raise |
the locking tabs, exposing the holes on the removable con- |
nector plug. |
Niles Audio Corporation | Miami, Florida USA |
|
3/4 5/6 |
|
|
2 | AMPLIFIER | SPEAKER |
1
SPEAKER PAIRS
Removable
screwless
connectors
5 | 6 |