INSTALLATION
Installing the Security Bracket and Cable
1.With the loudspeaker in the proper location per the layout, turn the loudspeaker over so the bottom of the loudspeaker is facing you, as shown in Figure 7.
Figure 7 Bottom of Loudspeaker
2.Take the nylon security cable, supplied with the loudspeaker and fold it in half. Using the middle of the cable, feed it through the Security Attachment Eyelet as shown in Figure 8.
Figure 8 Security Cable in Eyelet
3.Feed the opposite end of the nylon security cable through the exposed portion of the cable that was just fed through the security eyelet, as shown in Figure 9 and 10.
Figure 9 Security Cable | Figure 10 Security Cable after Looping |
Looping Through |
|
13
