4.Pull the ends of the security cable with the loops as tight as you can until the knot around the security eyelet is tightened as shown in Figure 11.
Figure 11 Security Cable
Connected and Tightened
5.Feed the Security Stake through the loops at the end of the security cable and insure that they are inserted into the cable holder provided at the top of the stake, as shown in Figure 12.
Figure 12 Security Stake
Attachment to Cable
6.Pick a spot in the ground which the loudspeaker will cover and drive the security stake all the way into the ground until the cable holder is completely under the surface of the ground, as shown in Figure 13.
Figure 13 Security Stake
Driven into Ground
7. Pull on the security cable and verify that the stake is securely held in the ground.
INSTALLATION
14
