HP Legato Networker manual Installing and Configuring the Unix Operating System

Completing the Recovery Process

Completing the Recovery Process

To complete the recovery process after replacing the hard drive, recover the following:

1.The UNIX operating system, if necessary. For information, see “Installing and Configuring the UNIX Operating System” on page 28.

2.The NetWorker software corresponding to the type of NetWorker computer you are recovering. For more information, see:

•“Recovering a NetWorker Server” on page 32.

•“Recovering a NetWorker Storage Node” on page 40.

•“Recovering a NetWorker Client” on page 43.

3

Each of the preceding procedures describe how to recover the NetWorker software as well as the computer’s application and user data.

Installing and Configuring the UNIX Operating System

The following sections provide information on reinstalling and configuring the UNIX operating system:

•“Prerequisites” on page 28

•“How to Install and Configure the UNIX Operating System” on page 29

•“Completing the Recovery Process” on page 32

Prerequisites

To recover the operating system, record the following information and ensure that it is current:

•Version and patch level of the operating system

•Installation path of the operating system

•TCP/IP properties:

–Adapter type

–IP address

–Default gateway

–Subnet mask

–DNS server

28	Legato NetWorker, Release 7.0
	Disaster Recovery Guide