Recovering a Replicated NDS Partition

e. Press [Enter], and both the files and NDS are copied to the new

server. DSMISC.LOG, VOLSINFO.TXT, and AUTOEXEC.NCF are copied to the SYS:SYSTEM directory. STARTUP.NCF is copied to the C:\NWSERVER directory.

f. The NDS restoration uses the information from SERVDATA.NDS (TSANDS.NLM is not needed). NDS is now fully functional on the server, but the partitions and replicas must still be reestablished.

g. When prompted, insert the NetWare License diskette for the server into the diskette drive.

h. Edit the STARTUP.NCF and AUTOEXEC.NCF files.

i. If either the STARTUP.NCF or the AUTOEXEC.NCF files have changed because they were backed up with the server-specific information, both the original and the new files are displayed for you to compare and make edits as necessary. If the current files are the same as the original files, only the current files are displayed.

The server now contains all the files necessary to perform an SMS remote filesystem restore.

3. To finish the installation:

• Press Enter to exit the utility. NetWare will not copy the remaining system and public files but will exit the utility. These files should be recovered from a backup.

• Alternatively, press F3 to Continue installation and wait while the utility copies the remaining system and public files. Then exit.

5 Task 3: Complete the NetWare SYS Volume Recovery

This section describes how to complete the recovery of the 4.11 SYS volume.

To complete the recovery of the 4.11 SYS volume:

1. Load the required name space modules for each restored volume. Use the VOLSINFO.TXT file to determine which name spaces need to be loaded (MAC.NAM, OS2.NAM, and so on).

2. Load the filesystem TSA specific to your version of NetWare by entering one of the following commands on the repaired or replaced server:

LOAD TSA410

LOAD TSA500

108

Legato NetWorker, Release 7.0

Disaster Recovery Guide