Chapter 11: Legato AAM for AIX,
2.On the primary node, enter the scanner command to restore the following configuration files:
scanner
where the device_path is the platform configuration and system files listed in step 1.
Task 3: Configure NetWorker Software as a Highly Available Application
On the primary node, configure the NetWorker software as a highly available application:
1.Run the envsh script. For example:
AIX
cd /usr/lpp/LGTOlcxx/bin
. ./envsh (or source ./envcsh if using C shell)
cd /opt/LGTOlcxx/bin
. ./envsh (or source ./envcsh if using C shell)
11
Linux
cd /opt/LGTOlcxx/bin
. ./envsh (or source ./envcsh if using C shell)
2.Run the networker.cluster script:
If you have already restored the nw_ux.lc file, answer No to the following prompt:
Do you wish to automatically add
NSR_SHARED_DISK_DIR and NSR_SERVICE_ID in
/AAM_ installation_ directory
Yes or No [Yes]? no
3.Start the cluster virtual server, as follows:
$FT_DIR/bin/ft_startup
4.Use the AAM Console to start the NetWorker resource group.
Legato NetWorker, Release 7.0 | 161 |
Disaster Recovery Guide |