Chapter 8: Sun Cluster Disaster Recovery
Important: To help ensure a smooth recovery process, have a copy of the Sun
Installation and Planning Configuration worksheets on hand. These worksheets 8 are located in the Sun Cluster 3.0 Release Notes and should be completed before
setting up the Sun Cluster.
Task 1: Replace the Damaged Hardware
To replace the damaged hardware:
•Replace all damaged nodes and ensure that network connections are working. For information about replacing the hardware and verifying network connections, refer to the Sun Cluster 3.x Hardware Guide and the server documentation.
Task 2: Install the Software
To install the software:
1.Reinstall and reconfigure the operating system and Sun Cluster software on all cluster nodes. For detailed instructions, refer to the Sun Cluster Installation Guide.
Important: Ensure that you reconfigure the cluster, including the disk device groups and resource groups, exactly as it was before the disaster.
2.Reinstall the NetWorker server software on all cluster nodes and configure the NetWorker server as a highly available Sun Cluster resource.
Important: If the NetWorker server was not set up as a highly available Sun Cluster resource, you need only install the NetWorker client on all cluster nodes. For detailed installation instructions for Sun Clusters, refer to the Legato NetWorker Installation Guide, Solaris Version.
Legato NetWorker, Release 7.0 | 137 |
Disaster Recovery Guide |