HP Legato Networker manual NetWorkerinstallpath\res directory

Models: Legato Networker

1 194
Download 194 pages 19.04 Kb
Page 49
Image 49

Chapter 4: Windows Disaster Recovery

Note: If the storage device required for a NetWorker server recovery is connected to a remote storage node, you might have to partially recover the storage node before you can recover the NetWorker server. For more information, see “Partial Recovery of a NetWorker Storage Node” on page 82.

5. If you know the bootstrap save set ID, recover the NetWorker media database and resource configuration files by running the mmrecov command from the command prompt.

 

If you do not know the bootstrap save set ID:

 

 

a. Look in the savegrp.log file, or run the scanner -Bdevice_name

 

 

command from the command prompt to determine the bootstrap

 

 

save set ID.

 

 

b. Run the mmrecov command to recover the NetWorker media

 

 

database and resource configuration files.

 

6.

Stop the NetWorker services.

 

7.

Copy the contents of the <NetWorker_install_path>\res.R directory to the

 

 

<NetWorker_install_path>\res directory.

 

8.

Restart the NetWorker services.

 

9.

Reset and inventory the autochanger, if you are using one. If you are using

4

a stand-alone drive, skip this step and proceed to step 10.

• If Removable Storage is disabled, do the following:

a. Run the nsrjb -vHEcommand to reset the autochanger. b. Run the nsrjb -Ivcommand to inventory the autochanger.

• If Removable Storage is enabled, do the following:

a. In the NetWorker Administrator program, delete the Removable Storage jukebox through the Autochangers dialog box.

b. Create a new Removable Storage jukebox using the jbconfig command at the command prompt.

c. In the NetWorker Administrator program, use the Autochanger Operations dialog box to reallocate all of the NetWorker volumes from the Import pool.

d. In the NetWorker Administrator program, click Reset in the Autochanger Operations dialog box. Once the reset is complete, click Inventory.

10. Recover the client file indexes by running the nsrck -L7command from the command prompt.

Legato NetWorker, Release 7.0

49

Disaster Recovery Guide

Page 49
Image 49
HP Legato Networker manual NetWorkerinstallpath\res directory